-Lined with blackout lining
-Shade is flat in lowered position
-Soft structured folds when pulled up
-Cord lock is standard
-Mounted on 1x2 headrail*
-OB mount shade has fabric return flaps on ends
-"RollEase" operating system available (See additional charge)
-Available with 5" attached padded cornice or soft valance (See additional charge)
-Available with permanent bottom folds (See additional charge)
-Fabric required is 6" wider than the finished width

Add 15" to the finished length
If required, add 10" for each additonal permananet fold

*If using "RollEase" see headrail size requirements

-Lined with blackout lining
-Shade has 5" soft folds when lowered
-Cord lock is standard
-Mounted on 1x2 headrail*
-OB mount shade has fabric return flaps
-"Rollease" operating system available (See additional charge)
-Available with 5" attached padded cornice or soft valance (See additional charge)
-Fabric required is 6" wider than the finished width and 2.5 times the finished length

If using "RollEase" see headrail size requirements

-Lined with white sateen lining (can be unlined)
-Shade is flat in lowered position
-Ribs are stitched in small pockets on the back of the shade approximately 10"apart
-Horizontal seams appear on the face of the shade
-Cord lock is standard
-Mounted on 1x2 headrail*
-OB mount shade has fabric return flaps on ends
-"RollEase operating system available (See additional charge)
-Fabric required is 6" wider than the finished width and 1.5 times the finished length

If using "RollEase" see headrail size requirements

-Lined with white sateen lining (can be unlined)
-Soft casual look without structured folds
-Cord lock is standard
-Mounted on 1x2 headrail*
-Shades over 48" wide requires additional dips
-"RollEase" operating system available (See additional charge)
-Fabric required must be 6" wider than the finished width

Add 24" to the finished length

*If using "RollEase" see headrail size requirements

-Lined with white sateen lining
-Small inverted pleats with tails
-Cord lock is standard
-Mounted on 1x2 headrail*
-"RollEase" operating system available (See additional charge)
-Fabric required is 1.5 times the finished width

Add 24" to the finished length

*If using "RollEase" see headrail requirements

-Lined with white sateen lining
-Print is centered on each pouf whn possible
-Poufs are approximately 11" to 14" wide
-Cord lock is standard
-Mounted on 1x2 headrail*
-"RollEase" operating system available (See additional charge)
-Fabric required is 2 times the finished width

Add 24" to the finished length

*If using "RollEase" see headrail requirements

-Lined with white sateen lining
-Shirred with 1 1/2" heading
-Poufs are approximately 11" to 14" wide
-Cord lock is standard
-Mounted on 1x2 headrail*
-"RollEase" operating system available (See additional charge)
-Fabric required is 2.5 times the finished width

Add 24" to the finished length

*If using "RollEase" see headrail requirements

-Lined with white sateen lining
-Shirred with 1 1/2" heading
-Poufs are approximately 11" to 14" wide
-Outside rows of rings set in to create tails on the ends
-Cord lock is standard
-Mounted on 1x2 headrail*
-"RollEase" operating system available (See additional charge)
-Fabric required is 2.5 times the finished width

Add 24" to the finished length

*If using "RollEase" see headrail requirements

-Specify if unlined or lined with white sateen
-Sections are approximately 11" to 14" wide
-Cord lock is standard
-Mounted on 1x2 headrail*
-Shades do not have returns
-"RollEase" operating system available (See additional charge)
-Fabric required is 2 times the finished width and 3 times the finished length

*If using "RollEase" see headrail requirements