-Lined with blackout
-Can also be interlined

-Box pleats are approximately 10" - 12" wide
-Pattern in fabric is centered on each box pleat
-Lined with blackout
-Can be interlined
-Contrast pleat inserts are optional (see additional charge)

-Box pleats are approximately 18" - 22" wide
-Pattern in fabric is centered on each box pleat
-Short point is 2" less than long point
-Lined with blackout
-Can be interlined
-Contrast pleat inserts are optional (see additional charge)

-Box pleats are approximately 10" - 12" wide
-Pleat inserts can be self or contrast fabric
-Covered buttons hold pleats open
-Lined with blackout

-Scalloped sections are approximately 15" - 18" wide
-Pattern in fabric is centered on each section and cone
-Short point is 2 1/2" less than long point
-Lining will be visible-decorative lining suggested
-Can be interlined

-A formal valance with soft folds from behind the cones
-Swag sections are approximately 18" - 22" wide
-Pattern in fabric is centered in each section and cone
-Lining will be visible-decorative lining suggested
-Can be interlined
-Tails longer than 27" are charged as separate jabots

-A formal valance where the pleats originate from the top of the board
-Swag sections are approximately 18" - 22" wide
-Pattern in fabric is centered in each section and cone
-Lining will be visible-decorative lining suggested
-Can be interlined
-Tails longer than 27" are charged as separate jabots

-Sides are gently shirred while center has softly draping folds
-Lining will be visible-decorative lining suggested
-Can be interlined

-Fold are approximately 4" - 6" wide
-Folds wrap around to create a return
-3/4" side board legs to hold return in place
-Blackout lined

-Flat valance with 1 3/8" fabric covered wood pole rolled up at bottom
-Can be interlined
-Lining will be visible - decorative lining suggested

-A series of overlapping triangles
-Fabric pattern centered on each triangle
-Decorative lining suggested
-Can be interlined

-Shirred with 2 1/2 times fullness
-Board mounted with or without a top heading
-Lined with white sateen
-Can also be blackout lined or interlined
-Bottom can be shaped or scalloped (see additional charge)

-Indicate side of heading and rod pocket
-Indicate finished length of short point and long point
- 2 1/2 times fullness is standard
-White sateen lining with pillow cased bottom edge

-4" buckrum in heading with 3 fold pleats
-Lined with blackout
-2 1/2 times fullness

-Available shirred or tailored
-Lined with white sateen
-Fabric should be 2 1/2 - 3 times wider in the width and 24" longer than the finished length

-Softly gathered swags wrapping around returns
-3/4" side board legs to hold returns in place
-Lined with white sateen
-Can be interlined

-Swags can be softly gathered or pleated
-Single swags will cover 30" to 48". Additional swags needed to cover areas over 48" wide
-Swags are lined with white sateen
-Jabots should be decorative lined
-Can be interlined
-It is best to provide a sketch

-Softly gathered swags and jabots with a tacking strip ready for mounting on your pole
-Each piece can be joined with hook and loop fastener if needed
-Swags are lined with white sateen
-Jabots should be decorative lined
-Can be interlined
-Be sure to specify pole diameter
-It is best to provide a sketch